In areas where the temperature drops a lot, there are usually some situations that can be uncomfortable or tedious. One of them is the effect that cold weather has on the locks of the doors. This is one of the main reasons why many of the homeowners look for locksmith services a lot during the winter. During this season many things tend to harden and break, and the locks do not escape this. However, it is important to know the reason why these locks fail during the lock of doors and how we could solve this type of problems.
Accumulation of Dirt, Moisture, and Oil
To know a little more about the effect that winter has on locks, let’s first know why these tend to fail during cold weather; One of the reasons why these locks fail, according to most locksmiths is that there is an accumulation of dirt, moisture, and oil in the locks and other parts of the doors.
This type of consequences can be seen more than anything in outdoor doors because they are exposed to dust from the environment and other factors that affect its operation. The more times these doors open and close, the more and more they become exposed to moisture and oil, and this tends to accumulate in the locks and over time affect performance. This does not happen in hot environments because the oil evaporates with the heat of the environment. However, in cold climates, the moisture that accumulates freezes depending on the temperature decrease resulting in an excessive accumulation of dirt and moisture that ends up affecting the functioning of the locking mechanism.
Displacement of Hinges and Other Structures
In places where there are low temperatures and humidity for long periods, the land tends to move, causing the structures of a house to move millimeter-wise. These ruptures or displacements can affect the operation of the door; It may be that it does not latch properly or that the hinges are out of balance, causing the door to become out of line with your site. In these cases, it is better to call professional locksmiths or qualified personnel to make the corresponding repairs so that the doors can open and close properly.
These are the faults that can occur in areas of cold weather, but now that we know the reasons why doors and locks can fail, we will learn to protect our locks and doors during the winter. It is always better to prevent than to regret and to know how to protect locks from cold environments we will give the following advice.
Clean the Locks
Cleaning the locks should be something that should be done with some frequency in this type of environment. The locks can be cleaned with warm water and mild detergent, this helps eliminate moisture, oil, and dirt that accumulates over the years. If this is done with a certain frequency, the locks will be kept in good condition and will guarantee its operation.
Lubricates the Hinges and Other Parts of the Door
Keeping the hinges, locks and other parts of the door well lubricated ensures the proper functioning of the locks and prevents the keys from breaking due to excessive friction. It is better to invest in a good quality lubricant to apply it regularly after cleaning the locks.
Install a Storm Door
Storm doors are doors specially designed for cold climates. These have special coatings on the locks and other parts that avoid all kinds of problems of blocking frozen locks. Another reason why these doors are recommended by expert locksmiths is that they are much easier to install than a framed door.
Besides being modern, they help to avoid the problems of frozen locks. The only detail that these locks have is that they can be very expensive and require access codes, but it is certainly something worth investing.
Place Rubber Covers on the Door Knobs
In several stores or hardware stores, you can buy rubber bands that work as insulation for the cold and are placed on the knobs or knobs of the door. It is necessary to know well the size of the knob to buy the correct rubber. There are a great variety and exclusive designs for specific doors. In case you cannot buy one of these tires, you can make it yourself with rubber, you just have to mark the measurement and make the rubber for the knob, but do not do it on the knob, and this could cause damage.
These are some of the preventions that we can make in our house to give war to cold weather and prevent the locks from freezing. However, there may be other occasions when it is necessary to resort to other solutions. For example, a frozen lock. To defrost a frozen padlock we can use liquid containers or spill lubricant on the padlock. If this does not work, you can also use isopropyl alcohol, however, this does not work so fast.
There are locksmiths who recommend using WD-40 oil, but locksmiths do not recommend this method because they can damage the padlock in the long term. The best option to melt ice from a frozen padlock is to spray isopropyl alcohol in a dispenser. In this way, the key is not heated or weakened. Even if you have a security chip it would not be damaged.
These are some safety measures and tips that we can put practice to keep our locks well lubricated and in good working order during the environment. It is also important to perform the proper maintenance in all locks of the house whether they are exposed to the cold or not. In case there are failures that cannot be controlled it is better to call the locksmith to be in charge and avoid major problems. If you do not know the problem, it is better than you do nothing and let the professionals take care of it. Call your insurance company or the locksmith company in your city to meet your need professionally and guaranteed.